E3D

Volcano - hardened steel nozzle - 1.20 mm / 3.00 mm

SKU:VOLHSE3DNOZZLE3MM120
GTIN:8719345001345
Disponibilitá: 3
€ 21,50  incl. IVA Disponibile

Solo 3 rimasti, ordina subito!

Materiale
    Volcano - hardened steel nozzle - 1.20 mm / 3.00 mm

    € 17,77
    Altre info
  • acciaio_temprato
  • Volcano - brass nozzle - 1.20 mm / 3.00 mm

    € 6,52
    Altre info
  • ottone
  • Volcano - Copper nozzle - 1.20 mm / 3.00 mm

    € 14,87
    Altre info
  • rame
Diametro output
Diametro input
1.75 mm
3.00 mm

Descrizione prodotto

E3D Volcano 1.20 mm nozzle made of hardened steel for 3.00 mm filament. Compatible with E3D Volcano kits and result in super-fast printing speeds to be used for filament filled with carbon fibre or other abrasive materials.

If you print carbon fibre filled, or other abrasive materials this is the nozzle you need! Carbon filled filaments will cause rapid and significant damage to standard nozzles. E3D has developed these incredibly wear-resistant nozzles that basically eliminate wear. A standard E3D-v6 Brass nozzle will be significantly worn by printing just 250g of carbon fibre material, that means you could get through 3 nozzles with a single spool of material! However these new nozzles will not wear out, even in extended use with very abrasive materials.

Paying a little extra for a hardened, wear-resistant nozzle makes both practical and economic sense. By the time you’ve printed a single spool of abrasive filament you’re saving money. It also saves a lot of time as you won’t be constantly replacing worn out nozzles. Furthermore you’ll be future-proofed for upcoming materials, these nozzles should be able to handle just about anything the material manufacturers think of next.

Because of the thermal and chemical treatment applied to the nozzle they do have a bit of a dark, sometimes uneven looking coloration and surface finish, and there can be a small amount of residue on the nozzles despite our final cleaning process. The coloration variance is normal and doesn’t affect function, any residue left on the nozzle will quickly be flushed in the first few millimeters of extrusion, especially if you flush it out with an abrasive filled material.

E3D Volcano nozzles are super fast printing nozzles for use with the Volcano block and packs to print large layer heights and at extremely high flow rates.

Volcano nozzles have extra long heated melt zones for ultimate filament melt speeds. The nozzles have a carefully crafted internal geometry to optimize flow and throughput, as well as ensuring the nozzle tip is appropriately sized for flattening down extra wide printed traces.

Specifiche

Proprietà ugello
Materiale Acciaio temprato
Specialità Wear-resistant
Diametro output 1.20 mm
Diametro input 3.00 mm
Filettatura M6
Dimensioni
Altezza 12.5 mm
Larghezza 7 mm
€ 21,50  incl. IVA Disponibile

Solo 3 rimasti, ordina subito!

Materiale
    Volcano - hardened steel nozzle - 1.20 mm / 3.00 mm

    € 17,77
    Altre info
  • acciaio_temprato
  • Volcano - brass nozzle - 1.20 mm / 3.00 mm

    € 6,52
    Altre info
  • ottone
  • Volcano - Copper nozzle - 1.20 mm / 3.00 mm

    € 14,87
    Altre info
  • rame
Diametro output
Diametro input
1.75 mm
3.00 mm

Informazioni su ReprapWorld
ReprapWorld

ReprapWorld è il negozio online numero uno per tutti i prodotti reprap per la tua stampante 3D. Abbiamo a disposizione un'ampia gamma di componenti per stampanti 3D, dalla nostra celebre linea di componenti elettronici ai filamenti ai nostri prodotti personalizzati. E tutto ciò a un prezzo molto competitivo!

Contatti

RepRapWorld B.V.
Klopperman 7
2292JE Wateringen
The Netherlands

Email: info@reprapworld.com
Tel: +31 (0) 85 - 009 15 31

Copyright 2009 - 2020 | ReprapWorld B.V.