Acquista l'adesivo 3DLAC in IT

3DLAC Adhesives allow you to 3D print without worrying about warping or prints coming off the build plate. Easy to apply and available in multiple packages.

Adhesion stick|80 ML
The well known 3DLAC adhesive in handy Glue stick package
  • Avoid warping and prints coming off
  • Easy to apply and remove with water
  • No damage to 3D printer components
 
€ 5,90
Disponibile
Spray per adesione Plus 100ml|ABS, PLA e PETG
La miglior difesa dalle deformazioni e dal distaccamento dal piatto
  • Basta spruzzare un po' di 3DLAC su un piatto in vetro per un'ottima adesione
  • Per più di 30 stampe!
 
 
€ 7,50
Disponibile
Spray per adesione 400ml |ABS, PLA e PETG
La miglior difesa dalle deformazioni e dal distaccamento dal piatto
  • Basta spruzzare un po' di 3DLAC su un piatto in vetro per un'ottima adesione
  • Per più di 100 stampe!
 
 
€ 11,50
Disponibile

Which package to use?

For most people the 3DLAC 400ml can is most cost efficient and can be used for at least 100 3D prints. Just spray a bit to the build surface of your printer and start a 3D print.As easy as that!

Alternatively the 3DLAC 100ml bottle is available, which is not pressurized. Easy to use for many 3D-prints and a bit more affordable. However, compared to the 400ml package the spray is less distributed over the build surface.

New in the product line is the 3DLAC 80ML glue stick, which allows you to apply the 3Dlac directly onto the surface. The reduces residue on 3D printer components, making it safer for your printer. But the volume is a bit less and it takes more time to apply. Also the glue stick can be shipped easily as it has no hazard signs, which also makes it safer to use.

3D printing with 3DLAC adhesives

3DLAC adhesives sprays and stick work great with a variety of 3D printing materials, including PLA, ABS and PETG. Just apply the 3DLAC to your build surface, which can be glass or any other material, and heat up the platform to the applicable temperature. After the print is done, let the platform cool and wait for the print to pop off. In some cases you may need a sharp spatula to remove a larger 3D print. The following table gives a guideline to the recommended temperature for the materials:

PLA filament
55° celsius
PETG filament
65° celsius
ABS filament
70-90° celsius
Perché ReprapWorld?
  • Spedizione nello stesso giorno lavorativo!
  • Più di 3.000 prodotti a catalogo
  • Più di 45.000 clienti soddisfatti in più di 40 paesi
  • Pagamenti sicuri con qualsiasi metodo
  • Supporto tecnico professionale (più di 10 anni di esperienza nel campo della stampa 3D)
Paga in sicurezza utilizzando


home
Copyright 2009 - 2022 | ReprapWorld