Le ultime notizie da RepRapWorld


Written by Lillianne Grootens on 20/04/2021

Duet 3 Tool Distribution Board
With this new board you can connect up to 4 Duet 3 Toolboards to the Duet 3 mainboard at one time! It has a 2-way barrier strip for Power in, four 2-way JST VH connectors, two RJ11 connectors for CAN bus in/out , four 4-pin JST ZH connectors, four pairs of 2-pin headers and a CAN bus termination 2-pin header. Want to know more about this amazing board then click here!

Rotating Magnetic Filament Monitor
We now have the Duet 3D filament monitor. You can connect it to your Duet 2 or 3 and it can detect multiple issues like:

  • Filament run out
  • Extruder skipping steps
  • Nozzle starting to jam
  • Filament beginning to grind in the extruder

The magnet rotation is sensed and constantly reported to Duet board what makes this monitor extremely accurate for a wide range of filaments.  Click here to find out more!

Duet 3 Toolboard 1LC
This new Toolboard works with the Duet3D Mainboard. It is a CAN-FD connected expansion board  that is designed to provide complete control for a direct drive extruder. You can fit the E3D Hemera  on there, however it can be used with other direct drive extruders with suitable brackets too. You can connect the stepper motor, heater, temperature sensor, fans, filament monitor and optionally Z probe to this Toolboard what will result that only the CAN-FD and power wires run back to the Mainboard or Distribution board.
Want to find out more about its main features and the optional connector pack of this great Toolboard? Then click here!

Duet 3 Mini 5+
We now have the Mini 5+ in our assortment this slimmer version of the Duet 3 board is available in a Wifi and Ethernet version. IT is suitable for most 3D printers and upgradable with many available Duet 3 addons.

The board has a 32-vit ARM processor, provides 5 on-board drivers and has the normal complement of heater, fans, IO, LCD etc. This board has the option of using an SBC (Single Board Computer) for control in the same manner as other Duet 3 main boards. This Mini 5+ has a lot to offer you in it's small size, click here for the Wifi version and here for the ethernet one to find out more!


Written by Bart Meijer on 08/04/2021

We have expanded our own branded popular PETG filaments. Already in our assortment were the Black and White 1.75mm, and now we also have 2.85mm available. Next to that we have added Light Green, Yellow, Red, Blue, Gray and Silver in both diameters. PETG is now available in the most popular colours and thanks to the economic packaging we can offer this great value filament for a great price. Go check it out now.

Next to expanding our PETG filaments we also added new colours and diameters to our ABS assortment. Black and White is now available in 1.75mm and 2.85mm and Yellow, Orange and Silver are available in 1.75mm. This great value ABS is excellent for prototyping and is available at a great price point. Go check it out now.

Click here to check out our own branded RepRapfilaments


Written by Lillianne Grootens on 18/03/2021

After almost two years of waiting, the Snapmaker 2.0 is finally here and not just in one size, but three different models to suit all makers' needs! Each have the power to do 3D printing , cnc carving and laser engraving. It has automatic bed leveling, a filament detection sensor and a hotend that can go up to 275 degrees Celcius. For the CNC carving it comes with a 50W spindel and it is suitable for many different materials like wood and acrylic. The laser part of this printer is also fantastic with is powerful 450nm 1600W laser and the built-in camera that will give you the ability to see a preview of your design. You can edit and position your project however you want. The Snapmaker 2.0 comes with a 5" smart touchscreen and is easy to assemble.

These are the three models:

A150 
Printer volume: 300x316x390mm
3D printing volume: 160x160x145mm
CNC milling volume: 160x160x90mm
Laser engraving volume: 160x160mm
Heated bed temp: up to 110 degrees Celcius

Click here to find out more about this printer!

A250
Printer volume: 405x424x490mm
3D printing volume: 230x250x235mm
CNC milling volume: 230x250x180mm
Laser engraving volume: 230x250mm
Heated bed temp: up to 100 degrees Celcius

Click here to find out more about this printer!

A350
Printer volume: 495x506x580mm
3D printing volume: 320x350x330mm
CNC milling volume: 320x350x275mm
Laser engraving volume: 320x350mm
Heated bed temp: up to 80 degrees Celcius

Click here to find out more about this printer!



Written by Lillianne Grootens on 16/03/2021

Tighten your Ender 3 (Pro) belts now with this belt tensioner. You can tighten your X and Y axis on the Ender 3 and on the Pro you can only use it for the X-axis. If you have a Pro and you are looking for the Y-axis tensioner then click here
The tensioner has a nice black finish and a knob for easy adjustment.

It can also be fitted on every 20x20 aluminium frame using some slide nuts. Is this the upgrade you are looking for? Then check it out by clicking here!


Written by Lillianne Grootens on 11/02/2021

We have some great news, the new and improved E3D hemera kits are back in stock! You can now purchase the Direct and Bowden kits in our webshop again.

The Design is spectacular and this Dual Drive system can handle up to 10kg of force.It is easy to use and works great with flexible filaments. Go check them out now!

You can find the E3D Hemera kits here!

Why ReprapWorld?
  • Spedizione nello stesso giorno lavorativo!
  • Più di 3.000 prodotti a catalogo
  • Più di 45.000 clienti soddisfatti in più di 40 paesi
  • Pagamenti sicuri con qualsiasi metodo
  • Supporto tecnico professionale (più di 10 anni di esperienza nel campo della stampa 3D)
45.000+ satisfied customers
4.4 stars on Google
Pay safely using


Informazioni su ReprapWorld
ReprapWorld

ReprapWorld è il negozio online numero uno per tutti i prodotti reprap per la tua stampante 3D. Abbiamo a disposizione un'ampia gamma di componenti per stampanti 3D, dalla nostra celebre linea di componenti elettronici ai filamenti ai nostri prodotti personalizzati. E tutto ciò a un prezzo molto competitivo!

Contatti

RepRapWorld B.V.
Klopperman 7
2292JE Wateringen
The Netherlands

Email: info@reprapworld.com
Tel: +31 (0) 85 - 009 15 31

Copyright 2009 - 2021 | ReprapWorld B.V.